{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
Indexable insert for milling SOMT....20ER-LD, for high feed rate indexable face mills, PR1525
Article no.: 573993
Catalog no.: 222078
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | SOMT100420ER-LD PR1525 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | square | |
| Wide insert B | 10.45 mm | |
| Thickness of the insert S | 4.58 mm | |
| Length of cutting insert L | 10.45 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 10.45 mm | |
| Height of cutting edge | 4.58 mm | |
| Diameter of the cutting insert d | 10.45 mm | |
| Corner radius R | 2 mm | |
| Corner chamfer angle | 32.7 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 14 degrees | |
| Normal clearance angle (main cutting edge) | 16 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 16 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | SOMT100420-ER-LD | |
| Attachment hole diameter | 4.6 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel); S (difficult-to-machine materials) | |
| Tool application group | P25-P40; M20-M35; K20-K35; S15-S25 | |
| Cutting media, manufacturer’s designation | PR1525 | |
| Coating | Megacoat Nano | |
| Grade | PR1525 | |
| Insert thickness T | 4.58 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SOMT....20ER-LD | |
| Interface coding for insert according to ISO TS 13399-60 | SO004204R | |
| Insert designation | SOMT100420-ER-LD | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered (T) | |
| Cutting conditions | continuous | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 573993 | |
| Catalog number | 222078 | |
| EAN / GTIN | 4960664708154 | |
| Manufacturer number | TLB05608 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
200
P
180
P
160
P
140
P
100
Description
Version:
4-edge indexable inserts with convex cutting edges for low cutting forces.
Application:
LD geometry is also suitable for high cutting depths (ap max= 5 mm) at moderate feed rates.
Do not use for helical, plunging or contour milling, or on steep walls.
Do not use for helical, plunging or contour milling, or on steep walls.
Note:
Standard application values for ae = 0.3×D.