{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Intelligent rotary measured value sensor with angular measurement capability ng-TTR, maximum torque: 50N·m
Article no.: 579210
Catalog no.: 654381
Article code:
Click to enlarge image
Bamboo worktop - discontinued design; bamboo worktop 50 mm thick, extremely robust, cross-glued strips, oiled leaving no residues.
Click to enlarge image
Bamboo worktop - discontinued design; bamboo worktop 50 mm thick, extremely robust, cross-glued strips, oiled leaving no residues.
- Direction of tightening: For right and left-hand tightening
- Torque measuring accuracy: ±0.1
- Measuring accuracy rotational angle: ±0.5
- Interface: USB interface; Ethernet; RS485 interface
- Test certificate: Manufacturer’s test certificate
Product details
Technical Data
| maximum torque | 50 Nm | |
| Direction of tightening | For right and left-hand tightening | |
| Torque measuring accuracy | ±0.1 % | |
| Measuring accuracy rotational angle | ±0.5 degrees | |
| Interface | USB interface; Ethernet; RS485 interface | |
| Test certificate | Manufacturer’s test certificate | |
| Measuring range | 5 Nm - 50 Nm | |
| Angular resolution | 0.1 degrees | |
| Square drive | 3/8 in | |
| Drive square | 3/8 in |
Identification & Classification
| Article number | 579210 | |
| Catalog number | 654381 | |
| EAN / GTIN | 2050001941626 | |
| Manufacturer number | NG-TTR5000-QI-3/8 | |
| Manufacturer/responsible person | n-gineric gmbh, Spittelbronner Weg 59, 78056 VILLINGEN-SCHWENNINGEN, Germany, www.n-gineric.com |
Description
Version:
Measuring accuracy ±0.1 %.
Advantage:
- Ultra-compact design.
- Intelligent digital measurement – without a conventional measuring device.
- Very flexible, thanks to the wide variety of interfaces: USB and Ethernet for transferring measurement data as well as ng-Link for connecting peripheral devices from the n-gineric range.
- Measuring range of up to 2 Nm with integrated mechanical overload protection.
Application:
- For accurate measuring and screw fastening with 100 % checking in production.
- For checking and analysing screw fastenings.
- For calibrating and checking all kinds of hand-held and stationary screw turning tools.
Note:
Supplied without data cable; USB cable available under No. 654378.
DAkkS calibration on request.
DAkkS calibration on request.