{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning KNUX 160405R, for medium machining
Article no.: 587007
Catalog no.: 251030
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | KNUX 160405R Sorte HB7020 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhomboidal | |
| Width of insert B | 9.525 mm | |
| Thickness of insert S | 4.76 mm | |
| Insert version | right-hand | |
| Length of cutting edge l | 16 mm | |
| Corner radius R | 0.5 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 15 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | KNUX 160405R | |
| Attachment hole diameter | 0 mm | |
| Type of chip breaker | SM | |
| Cutting depth, recommended working area, min. | 0.5 mm | |
| Cutting depth, recommended working area, max. ap max | 5 mm | |
| Cutting depth ap, min. | 0.35 mm | |
| Cutting depth ap, max. | 4 mm | |
| Cutting speed, main application, min. | 120 m/min | |
| Cutting speed, main application, max. | 350 m/min | |
| Min. feed rate fz | 0.2 mm/rev. | |
| Max. feed rate fz | 0.5 mm/rev. | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7020 | |
| Coating | CVD | |
| Grade | HB7020 | |
| Insert thickness T | 4.76 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | KNUX 160405R | |
| Interface coding for insert according to ISO TS 13399-60 | KNUX160405 | |
| Insert designation | KNUX 160405R | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M); steel (P) | |
| Tolerance Class | U | |
| Machining method | thread processing internal / external (EGE) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Number of potential uses | 2 pcs. | |
| Weight | 143 g | |
| Content | 1 pcs. |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 587007 | |
| Catalog number | 251030 | |
| EAN / GTIN | 4045197711144 | |
| Manufacturer number | 251030 HB7020 | |
| Article class | 21G | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
