{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Machine tap for synchronised spindles HSS-E-PM Form E, DLC, M: M2,5
Article no.: 587966
Catalog no.: 134280
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL00601005 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0060 mm | |
| Type of mounting | spigot | |
| Holder tolerance class | h6 | |
| Shank diameter DS | 6 mm | |
| Shank length LS | 46.5 mm | |
| Shank type | HB | |
| Thread type | M | |
| Thread nominal diameter metric | 2.5 mm | |
| Thread | M2.5 | |
| Thread pitch | 0.45 mm | |
| Thread tolerance class | 6HX | |
| Chisel edge diameter | 1.98 mm | |
| Length of tapping part Lc | 6.3 mm | |
| Tap infeed length | 0.74 mm | |
| Taper lead angle | 21 degrees | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Twist angle | 40 degrees; 45 degrees | |
| Type of thread-cutting tool | maskinsnittapper til synkron bearbejdning | |
| Taper lead form | E | |
| Application for type of drilling | Blind hole | |
| To depth (x diameter) | 2.5 | |
| Number of clamping slots | 3 | |
| Core hole diameter | 2.05 mm | |
| Flank angle | 60 degrees | |
| Square-drive width across flats □ | 4.9 mm | |
| Tool material | HSS-E-PM | |
| Cutting media, manufacturer’s designation | HSS-E PM | |
| Coating | DLC | |
| Interface | joint 1 | |
| Usable length L1 | 14.5 mm | |
| Overall length L | 70 mm | |
| Weight | 16 g | |
| Cutting direction | right-hand cutting | |
| Standard | Werksnorm | |
| Machining method | thread processing internal | |
| Colour ring | yellow | |
| Type of product | Taps |
Identification & Classification
| Article number | 587966 | |
| Catalog number | 134280 | |
| EAN / GTIN | 4045197707338 | |
| Manufacturer number | 134280 M2,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
30
N
35
N
20
N
25
N
20
N
25
N
55
N
35
Description
Version:
Sturdy version with right-hand helix and shank to DIN 1835-B.Special geometry for use on machines with synchronised spindle drives. The tap is controlled by the synchronising spindle of the machine. With the latest generation of special DLC coating sp2 for optimum tool life. For use with emulsion (fat content minimum 8%).
Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths.
Form E (lead chamfer: 1.5 - 2 turns) for the deepest possible thread depths.