{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Fluteless machine tap with oil grooves HSS-E-PM, TiAlN, G: G1/4
Article no.: 588041
Catalog no.: 139395
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 11 mm | |
| Thread type | G | |
| Thread nominal diameter inch | 0.25 in | |
| Thread | G1/4 | |
| Thread pitch | 1.337 mm | |
| Turns per inch | 19 | |
| Thread tolerance class | ISO 228 X | |
| Length of tapping part Lc | 39.48 mm | |
| Taper lead angle | 7.5 degrees | |
| Number of teeth | 6 | |
| Taper lead form | C | |
| Cutting part version | with lubrication groove and dirt trap groove | |
| Application for type of drilling | through hole; blind hole | |
| To depth (x diameter) | 3; 3 | |
| Number of clamping slots | 6 | |
| Core hole diameter | 12.55 mm | |
| Core hole diameter guideline value | 12.55 mm | |
| Flank angle | 55 degrees | |
| Square-drive width across flats □ | 9 mm | |
| Tool material | HSS-E-PM | |
| Machining group | N (non-ferrous metals) | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Overall length L | 100 mm | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 2189 | |
| Machining method | thread processing internal (EGI) | |
| Colour ring | yellow | |
| Type of product | fluteless tap |
Identification & Classification
| Article number | 588041 | |
| Catalog number | 139395 | |
| EAN / GTIN | 4045197705877 | |
| Manufacturer number | 139395 G1/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
42
N
42
N
28
P
32
Description
Version:
DIN 2189 (≈ DIN 5156). With oil grooves; optimum lubrication effect even in deeper threads.
The innovative polygon form permits a wide application spectrum. The multi-function layer structure achieves maximum service life even in high-tensile materials.
Special TiAlN coating, highly suitable for aluminium alloys.
The innovative polygon form permits a wide application spectrum. The multi-function layer structure achieves maximum service life even in high-tensile materials.
Special TiAlN coating, highly suitable for aluminium alloys.
Application:
For Whitworth parallel pipe threads DIN-ISO 228/1 (threads that do not form a seal within the connection).