{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-precision countersink 90°, uncoated, External ⌀ Dc: 7mm
Article no.: 588049
Catalog no.: 150152
Article code:
Click to enlarge image
Click to enlarge image
Click to enlarge image
Three-flute countersinks for accurate centring.
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Manufacturer’s designation | Präzisions-Kegelsenker | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Interface coding | ZYL00601005 | |
| Shank diameter DS | 6 mm | |
| Shank length LS | 42.8 mm | |
| Cutter diameter, min. Dc min. | 1.8 mm | |
| Cutter diameter, max. Dc max. | 7 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| For hole diameter d | 2.3 mm | |
| Flute length Lc | 5.2 mm | |
| Taper length | 2.6 mm | |
| Number of teeth Z | 3 | |
| Twist direction | neutral, straight | |
| Helix angle, min. | 0 degrees | |
| Angle, 1st step | 90 degrees | |
| Pilot pin | without guiding pin | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | uncoated | |
| Interface | joint 1 | |
| Gauge length A | 14 mm | |
| Usable length L1 | 14 mm | |
| Overall length L | 50 mm | |
| Functional length | 14 mm | |
| Weight | 10 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 335 C | |
| Machining method | profile countersinking (SPR) | |
| Colour ring | without | |
| Type of product | countersink | |
| Content | single part |
Identification & Classification
| Article number | 588049 | |
| Catalog number | 150152 | |
| EAN / GTIN | 4045197716927 | |
| Manufacturer number | 150152 7 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
70
N
33
P
28
P
27
P
27
Description
Version:
All countersinks have 3 cutting edges, radially relieved.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Flutes are ground from solid.
High-precision countersink, produced with tight manufacturing tolerances similar to DIN 335-C.
Three drive flats on the shank for use in a 3-jaw chuck.
Application:
High precision countersinks for chatter-free countersinking.