{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling ⌀ 25 mm, for copy milling cutters, Helix
Article no.: 588223
Catalog no.: 212685
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | ST1400 | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Fräswendeplatte ? 25 mm; ST1400 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable | |
| Base form | round | |
| Insert version | neutral | |
| Insert diameter | 25 mm | |
| Corner chamfer width | 6 mm | |
| Corner angle | 12 degrees | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Kopierfräser | |
| Cutting media, manufacturer’s designation | HB7520 | |
| Coating | AlCrN | |
| Grade | HB7520 | |
| Insert thickness | 25 mm | |
| Type of product | Cutter insert | |
| Number of teeth | 1 pcs. | |
| Suitable for material | cast iron (K); hardened steel (H); stainless steel (M); steel (P) | |
| Machining method | form milling (die milling) (FFO) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Weight | 23 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 588223 | |
| Catalog number | 212685 | |
| EAN / GTIN | 4045197712554 | |
| Manufacturer number | 212685 ST1400 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
360
P
300
P
240
P
180
P
120
M
180
M
160
K
240
Description
Version:
- Maximum concentricity and interchange accuracy: ±0.015 mm.
Detailed application values can be found in the GARANT machining handbook No. 110020.
Application:
Full-radius inserts for general use in machining drop-forgings, and in tool and mould making.
With chip breaker for long-chipping materials.
With chip breaker for long-chipping materials.