{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling POMX 10T5ZEER U, for high feed rate indexable face mills, HB9640
Article no.: 588244
Catalog no.: 213190
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | POMX 10T5ZEER U | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert | 7.5 mm | |
| Thickness of the insert | 5.9 mm | |
| Length of cutting insert | 7.5 mm | |
| Insert version | right-hand | |
| Length of cutting edge | 7.5 mm | |
| Height of cutting edge | 5.9 mm | |
| Diameter of the cutting insert | 14 mm | |
| Corner radius | 0 mm | |
| Corner chamfer length | 0.8 mm | |
| Corner chamfer angle | 19 degrees | |
| Corner chamfer width | 2 mm | |
| Corner angle | 108 degrees | |
| Rake face chamfer width | 0.8 mm | |
| Rake face chamfer angle | 19 degrees | |
| Rake angle | 16.5 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 6.64 mm | |
| ISO-Code | POMX 10T5ZEER U | |
| Attachment hole diameter | 4.4 mm | |
| Type of chip breaker | UNI | |
| Wiper length axial | 2 mm | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); N (non-ferrous metals); P (steel); S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB9640 | |
| Coating | CVD | |
| Grade | HB9640 | |
| Insert thickness | 5.9 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | PO10T5ZE3R | |
| Interface coding for insert according to ISO TS 13399-60 | PO10T5ZE3R | |
| Insert designation | POMX 10T5ZEER U | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 5 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | cast iron (K); heat-resistant super-alloys (S); non-ferrous materials (N); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 5 pcs. | |
| Weight | 9 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 588244 | |
| Catalog number | 213190 | |
| EAN / GTIN | 4045197714930 | |
| Manufacturer number | 213190 UNI | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
360
P
320
P
280
M
180
M
150
S
80
Description
Version:
Sturdy insert version (thickness = 5.9 mm).
Positive geometry for high feed rates.
Flat cutting edge length: 2 mm for high surface quality.
Special cost-effectiveness due to 5 cutting edges.
Positive geometry for high feed rates.
Flat cutting edge length: 2 mm for high surface quality.
Special cost-effectiveness due to 5 cutting edges.
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 2.2 mm.