{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SDHT 0903 AFFN, for face mills, HU7815
Article no.: 588265
Catalog no.: 214478
Article code:
Product details
Technical Data
| Base form | square | |
| Thickness of insert S | 3.18 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 9.525 mm | |
| Height of cutting edge | 3.18 mm | |
| Diameter of insert d | 9.525 mm | |
| Corner radius R | 0 mm | |
| Corner chamfer length C | 2.3 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 15 degrees | |
| ISO-Code | SDHT 0903 AFFN | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | HU7815 | |
| Coating | uncoated | |
| Grade | HU7815 | |
| Insert thickness T | 3.18 mm | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | aluminium | |
| Tolerance Class | H | |
| Machining method | face milling (FPL) | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | chamfered and rounded (S) | |
| Number of potential uses | 4 pcs. | |
| Weight | 3 g | |
| Content | 1 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 588265 | |
| Catalog number | 214478 | |
| EAN / GTIN | 4045197707475 | |
| Manufacturer number | 214478 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
1500
N
1000
N
500
Description
Version:
- Indexable inserts for higher cutting speeds and feed rates.
- Precision sintered and ground for best surface finish quality.
- Micro-grain structure gives high strength and wear resistance.
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 3 mm.