{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling AN.U 120608, for indexable milling cutters
Article no.: 588289
Catalog no.: 215113
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | 215113 ALU | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Wide insert | 6 mm | |
| Thickness of the insert | 6.1 mm | |
| Length of cutting insert | 12 mm | |
| Insert version | neutral | |
| Length of cutting edge | 24.22 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 5 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 10 mm | |
| ISO-Code | AN.U 120608; AN1206084R | |
| Tool material | Carbide | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | HU 9815 | |
| Coating | uncoated | |
| Insert thickness | 6.1 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | AN.U 120608 | |
| Interface coding for insert according to ISO TS 13399-60 | AN1206084R | |
| Insert designation | AN.U 120608 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | Aluminium; non-ferrous materials (N) | |
| Tolerance Class | G | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutting conditions | interrupted | |
| Number of potential uses | 8 pcs. | |
| Weight | 10.5 g | |
| Content | 1 pcs. | |
| Correction factor | 2.5 |
Identification & Classification
| Article number | 588289 | |
| Catalog number | 215113 | |
| EAN / GTIN | 4045197703132 | |
| Manufacturer number | 215113 ALU | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
600
N
600
N
500
Description
Version:
Very sturdy double-sided 4-edge indexable insert.
The unique indexable insert geometry means the insert is not weakened by the securing hole.
The unique indexable insert geometry means the insert is not weakened by the securing hole.
Cutting data:
ap max = 12 mm.
ap = 10 mm (recommendation).
ap = 10 mm (recommendation).
Attention:
Not suitable for full-slot milling.
Note:
Side milling: Standard application values for ae = 0.3×D / ap = 10 mm.