{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
MFH Harrier high feed rate milling cutter with thread, for indexable inserts SO..
Article no.: 589221
Catalog no.: 222060
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, radial | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M12 | |
| Shank diameter DS | 12 mm | |
| Shank length LS | 22 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Insert designation | SOMT100420ER-GM | |
| Interface | joint 1 | |
| Gauge length A | 35 mm | |
| Usable length L1 | 20 mm | |
| Overall length L | 57 mm | |
| Max. speed | 15’500 min-1 | |
| Weight | 150 g | |
| Cutting direction | right-hand cutting | |
| Machining method | circular milling (round milling); countersinking (plunge milling); face milling | |
| Machining strategy | HPC | |
| Cutter diameter min. D1 | 28 mm | |
| Cutter diameter max. D1 | 28 mm | |
| Head diameter D2 | 26 mm | |
| Max. cutting edge length | 10.3 mm; 10.3 mm | |
| Setting angle | 10 degrees | |
| Relief angle | 10 degrees | |
| Plunge angle max. αmax | 4.5 degrees | |
| Plunge depth max. ae max | 10.4 mm | |
| Cutting direction | right-hand | |
| Number of effective cutters (peripheral side) | 2 | |
| Number of effective cutters (end face) | 2 | |
| Tool version | solid steel | |
| Number of indexable inserts | 2 | |
| Diameter of circular interpolation milling min. | 39 mm | |
| Diameter of circular interpolation milling max. | 54 mm | |
| Max. cutting depth ap | 1.5 mm | |
| Content | single part | |
| Type of product | Copy mill | |
| Mounting thread M | M16; M12 |
Identification & Classification
| Article number | 589221 | |
| Catalog number | 222060 | |
| EAN / GTIN | 4960664712465 | |
| Manufacturer number | THN07551 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.