{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ER collet HP, ER 8, Nominal clamping ⌀ d: 1mm
Article no.: 589805
Catalog no.: 309365
Article code:
Click to enlarge image
Click to enlarge image
High concentricity and repetition accuracy due to optimum design.
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Manufacturer’s designation | FAHRION HP-Spannzange | |
| Interface position | on the machine | |
| Holder type | collet taper | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 8 | |
| Shank length | 13.6 mm | |
| Clamping diameter | 1 mm | |
| External diameter | 8.5 mm | |
| Length of collet | 13.6 mm | |
| Shape | conical | |
| Taper angle | 16 degrees | |
| Material | steel | |
| Clamping profile | round | |
| With axial compensation | no | |
| With radial compensation | no | |
| Concentricity ≤ | 2 µm | |
| Collet version | dead length collet | |
| With seal | no | |
| Through-coolant available | no | |
| With length adjustment | no | |
| Tool pull-out protection | no | |
| Interface | joint 1 | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 589805 | |
| Catalog number | 309365 | |
| EAN / GTIN | 2050001765178 | |
| Manufacturer number | 13610010100 | |
| Manufacturer/responsible person | Eugen Fahrion GmbH & Co. KG Präzisions-Spannwerkze, Forststraße 54, 73667 Kaisersbach, Germany, www.fahrion.de |
Description
Version:
System concentricity and repetition accuracy 3 µm (3×D, maximum = 50 mm), in conjunction with FAHRION CENTRO P chucks.
Corrosion protection: Collets fully coated with FAHRION Protect, including the functional faces.
Corrosion protection: Collets fully coated with FAHRION Protect, including the functional faces.
Advantage:
The coating increases the service life of the collet and ensures full functionality and precision.
Suitable for:
Precision ER collet chuck CENTRO P.
Note:
- Optimum concentricity only when used in CENTRO P chucks.
- Clamping range h10 (nominal size only).