{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Base jaw set, 3 pieces, straight serration, for chuck type: 315
Article no.: 590105
Catalog no.: 313207
Article code:
Product details
Technical Data
| Jaw width B | 32 mm | |
| Jaw length L | 115 mm | |
| For lathe chuck diameter | 315 mm | |
| Clamping face | serrated | |
| Suitable for interchangeable inserts | yes | |
| With rib | yes | |
| Tenon width B1 | 12 mm | |
| With groove | yes | |
| Slot width B2 | 20 mm | |
| Function | fixed | |
| Type of fastening | screwing | |
| Hole spacing to one other A1 | 40 mm | |
| incl. screws | yes | |
| Content | 3 pcs. | |
| Type of product | lathe chuck jaws | |
| Content | pieces |
Identification & Classification
| Article number | 590105 | |
| Catalog number | 313207 | |
| EAN / GTIN | 2050001929020 | |
| Manufacturer number | 0159102 | |
| Manufacturer/responsible person | SCHUNK SE & Co. KG, Bahnhofstraße 106-134, 74348 Lauffen/Neckar, Germany, www.schunk.com |
Description
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.
To accept hard or soft top jaws. Fastening screws for top jaws are supplied.