{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Soft top jaw set, 3 pieces, for chuck type: 400
Article no.: 590116
Catalog no.: 313220
Article code:
Product details
Technical Data
| Jaw width | 50 mm | |
| Jaw height | 73 mm | |
| Jaw length | 180 mm | |
| For lathe chuck diameter | 400 mm | |
| Clamping face | smooth | |
| Suitable for interchangeable inserts | no | |
| With rib | yes | |
| With groove | yes | |
| Slot width | 18 mm | |
| Function | fixed | |
| Type of fastening | screwing | |
| Hole spacing to one other | 60 mm | |
| Incl. screws | no | |
| Content | 3 pcs. | |
| Type of product | lathe chuck jaws | |
| Material | steel | |
| Surface | burnished | |
| Content | pieces |
Identification & Classification
| Article number | 590116 | |
| Catalog number | 313220 | |
| EAN / GTIN | 2050001929136 | |
| Manufacturer number | 0153104 | |
| Manufacturer/responsible person | SCHUNK SE & Co. KG, Bahnhofstraße 106-134, 74348 Lauffen/Neckar, Germany, www.schunk.com |
Description
Version:
Unstepped, for boring out to individual clamping ⌀. Precision milled contact face, burnished.
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
For fitting to hardened base jaws. For clamping irregularly shaped or already machined components which have to be protected against damage. The jaws are machined according to the contours of the component.
Material:
Quality product made of 16MnCr5.
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
Aluminium top jaws on request.