{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Soft monoblock jaw set, 3 pieces straight serration, for chuck type: 200
Article no.: 590123
Catalog no.: 313227
Article code:
Product details
Technical Data
| Manufacturer’s designation | Blockbacken-Set 3-teilig gerade Verzahnung, für Futter-Typ: 200 | |
| Jaw width | 22 mm | |
| Jaw height | 65 mm | |
| Jaw length | 84 mm | |
| For lathe chuck diameter | 200 mm | |
| Clamping face | serrated | |
| Content | 3 pcs. | |
| Type of product | lathe chuck jaws | |
| Material | steel | |
| Content | pieces |
Identification & Classification
| Article number | 590123 | |
| Catalog number | 313227 | |
| EAN / GTIN | 2050001929204 | |
| Manufacturer number | 0164100 | |
| Manufacturer/responsible person | SCHUNK SE & Co. KG, Bahnhofstraße 106-134, 74348 Lauffen/Neckar, Germany, www.schunk.com |
Description
Version:
Serrations hardened and ground.
Application:
As the jaws can be changed or adjusted to the required diameter in just a few seconds, it is useful to have several jaw sets on hand ready for use at the machine. This minimises set-up times. The jaw units consist for example of several sets of base jaws with soft top jaws, which can be machined out to the required diameters. This rationalisation method is not only necessary for NC machines but also important for every lathe type.
Material:
C45, annealed
Suitable for:
Schunk self-centring chucks No. 313115; 313117; 313135; 313137, Röhm self-centring chucks Duro No. 313120; 313140 and other self-centring chuck systems.
Note:
- Hard top and stepped jaws purchased subsequently must be ground internally in the chuck for concentricity and run-out.
- Please check the serrations when matching to lathe chucks.