{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Combination four-jaw lathe chucks short taper mount, DIN 702-3, Outer ⌀ A / taper: 200/6mm
Article no.: 590201
Catalog no.: 315645
Article code:
Product details
Technical Data
| Number of jaws | 4 pcs. | |
| Outer diameter A | 200 mm | |
| Height without jaws H1 | 112 mm | |
| Height with jaws H2 | 143 mm | |
| Pitch circle F | 133.4 mm | |
| Aperture diameter E | 55 mm | |
| Taper size | 6 | |
| Centring diameter B | 106.39 mm | |
| Shape of width across flats | square | |
| Square K | 11 mm | |
| With stud | yes | |
| Number of studs | 4 pcs. | |
| Size of studs | M10 | |
| Type of product | lathe chuck | |
| Material | cast iron | |
| Standard | DIN 702-3 | |
| Operation | manual | |
| Weight | 19 kg | |
| Content | single part |
Identification & Classification
| Article number | 590201 | |
| Catalog number | 315645 | |
| EAN / GTIN | 5907412202860 | |
| Manufacturer number | 354635190200 | |
| Manufacturer/responsible person | Bison Spanntechnik GmbH, Reisholzer Werftstraße 42, Halle 3, 40589 Düsseldorf, Germany, www.bison-chuck.com |
Description
Version - image:
Individual adjustment of combined jaws.
Centring adjustment of jaws.
Centring adjustment of jaws.
Application:
Combined clamping option due to two different jaw adjustments:
a) Self-centring adjustment of the base jaws (geared scroll);
b) Individual adjustment of top jaws.
This allows irregularly shaped components to be clamped as if to a face plate. The gear scroll for jaw adjustment is through-hardened, the flanks of the scroll and of the bottom jaw teeth are ground on both sides.
With short taper mount to DIN 702-3 with studs and collar nuts for spindle noses to DIN 55027. (DIN 55027 and international standard ISO 702/lll are identical to DIN 55022 (old standard)). The chuck is fitted to the spindle nose directly, without an intermediate adaptor.
a) Self-centring adjustment of the base jaws (geared scroll);
b) Individual adjustment of top jaws.
This allows irregularly shaped components to be clamped as if to a face plate. The gear scroll for jaw adjustment is through-hardened, the flanks of the scroll and of the bottom jaw teeth are ground on both sides.
With short taper mount to DIN 702-3 with studs and collar nuts for spindle noses to DIN 55027. (DIN 55027 and international standard ISO 702/lll are identical to DIN 55022 (old standard)). The chuck is fitted to the spindle nose directly, without an intermediate adaptor.
Standard:
DIN 702-3.
Material:
Cast iron
Supplied with:
1 set = 4 hardened base jaws,
1 set = 4 hardened reversible jaws (internally and externally applicable)
1 chuck key,