{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre shock absorbing, Morse taper: 5
Article no.: 590302
Catalog no.: 321405
Article code:
Product details
Technical Data
| Länge gesamt L | 276 mm | |
| Durchmesser Kopf D | 92 mm | |
| Ausführung Zentrierspitze | mitlaufend | |
| Spitzenwinkel α | 60 Grad | |
| größter Spitzen-Durchmesser D1 | 40 mm | |
| Spitzenlänge L3 | 42 mm | |
| mit Stoßdämpfung | ja | |
| Federweg | 50 mm | |
| Nutzlänge L2 | 146 mm | |
| Werkstückgewicht max. | 1.000 kg | |
| Drehzahl max. | 3.500 min-1 | |
| Rundlauffehler max. | 0,005 mm | |
| typische Verwendung | Drehen | |
| Gewicht | 5,4 kg | |
| Produktart | Zentrierspitze |
Identification & Classification
| Article number | 590302 | |
| Catalog number | 321405 | |
| EAN / GTIN | 4045197720962 | |
| Manufacturer number | 321405 5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Point angle 60°.
- Sprung live centre to compensate pressure and length, shock-absorbing.
- Live centre of through hardened tool steel precision ground to match the bearing.
- Precision roller bearing, lubricated for life.
- Shaft seal prevents ingress of dirt and coolant.
- Extremely rigid version with additional shaft bearing.
- Entire tool is hardened and ground.
Precision version.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
- For damping impacts.
- For compensating thermal expansion.
- Suitable for use with face drivers.