{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Nail anchor FNA II 6 x 30/30 R RB stainless steel (200pcs.)
Article no.: 598481
Catalog no.: 8478
Article code:
Product details
Technical Data
| d0 | 6 mm | |
| min. anchorage depth | 30 mm | |
| Material | Stainless steel | |
| h2 | 66 mm | |
| Fire protection relevant | Yes | |
| Professional / DIY | Profi | |
| h1 | 70 mm | |
| Sleeve material | Stainless steel | |
| Packing | Folding box | |
| Max. thickness of the attachment | 30 mm | |
| l | 68 mm | |
| Surface protection sleeve | Untreated | |
| min. drill hole depth for pre-installation | 36 mm | |
| Test marks / approvals | Fire classification | |
| Self-drilling | No |
Packaging units
| 1 Pack | 50 Pieces | |
| 1 Pallet | 27200 Pieces |
Identification & Classification
| Article number | 598481 | |
| Catalog number | 8478 | |
| EAN / GTIN | 4048962205749 | |
| Manufacturer number | 530798 | |
| Article class | RMM |
Description
Advantage:
- The special active principle allows for a simple hammerset installation and therefore a short processing time.
- The extremely short anchor depth prevents reinforcement hits and creates the conditions for a trouble-free installation.
- The optimised expansion clip ensures a good hold when the anchor is placed into the drill hole and prevents it from falling out during overhead installations.
- The massive shaft cross-section guarantees a high load-bearing capacity, thus offering an extremely high level of safety.
Application Area:
- Fire protection plates
- Fire protection boards
- Ventilation systems
- Wire and Nonius hangers
- Mounting rails
- Metal clamps
- Substructures made of wood and metal
Approved for:
- Concrete C12/15 to C50/60, cracked, for multiple fixings of non-structural applications
- Solid sand-lime brick
- Natural stone with dense structure
- Prestressed hollow-core concrete slabs
Application Notes:
- The FNA II with nail head is suitable for push-through installation.
- The installed nail anchor FNA II expands automatically under load. The cone is pulled into the expansion clip and expands it against the hole wall.
- Available setting tools:
FNA S-SBO for attachment to drill
FNA S-SDS for series installation with a hammer drill
FNA S-H for the manual installation of mounting rails