{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling PNMG 1106XNEN-GH, for face mills, PR1510
Article no.: 599312
Catalog no.: 223314
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | PNMG 1106XNEN-GH; Typ GG | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 11 mm | |
| Blade thickness | 6.35 mm | |
| Insert length | 15.875 mm | |
| Insert version | neutral | |
| Cutting edge length | 11 mm | |
| Insert diameter | 15.875 mm | |
| Corner radius | 0.2 mm | |
| Corner chamfer length | 0 mm | |
| Corner chamfer angle | 0 degrees | |
| Corner angle | 108 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 65 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | PNMG 1106XNEN-GH | |
| Tool material | Carbide | |
| Machining group | K (cast iron); M (stainless steel); P (steel) | |
| Tool application group | Planfräsen | |
| Coating | Megacoat Nano | |
| Grade | PR1510 | |
| Insert thickness | 6.35 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | PNMG 1106XNEN-GH | |
| Interface coding for insert according to ISO TS 13399-60 | PN1106XN2N | |
| Insert designation | PNMG 1106XNEN-GH | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 10 pcs. | |
| Direction of action | neutral | |
| Suitable for material | cast iron (K); stainless steel (M); steel (P) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing; Roughing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | continuous | |
| Number of potential uses | 10 pcs. | |
| Weight | 21 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 599312 | |
| Catalog number | 223314 | |
| EAN / GTIN | 4960664732876 | |
| Manufacturer number | TLA05210 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
K
180
Description
Version:
10-edge pentagonal indexable inserts for stable and economical machining.
GH - stable cutting edge.
GH - stable cutting edge.
Note:
Standard application values for ae = 0.3×D.