{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling POMX 0704ZESR R, for high feed rate indexable face mills, HB9715
Article no.: 613536
Catalog no.: 213131
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | POMX 0704ZESR R | |
| Dry machining | suitable | |
| Oil | suitable | |
| Air | suitable | |
| Base form | pentagonal | |
| Insert width | 5.24 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 5.24 mm | |
| Insert version | right-hand | |
| Cutting edge length | 5.24 mm | |
| Cutting edge height | 4.76 mm | |
| Insert diameter | 10.5 mm | |
| Corner radius | 0.6 mm | |
| Corner chamfer length | 1.5 mm | |
| Corner chamfer angle | 20 degrees | |
| Corner angle | 106 degrees | |
| Rake angle | 15 degrees | |
| Setting angle | 20 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 20 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 3.74 mm | |
| ISO-Code | POMX 0704ZESR R | |
| Wiper length axial | 1.5 mm | |
| Tool material | Carbide | |
| Machining group | S (difficult-to-machine materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | HB9715 | |
| Coating | TiAlSiN | |
| Grade | HB9715 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | PO0704063R | |
| Interface coding for insert according to ISO TS 13399-60 | PO0704063R | |
| Insert designation | POMX 0704ZESR R | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 5 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | heat-resistant super-alloys (S) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 5 pcs. | |
| Weight | 0.39 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 613536 | |
| Catalog number | 213131 | |
| EAN / GTIN | 4045197743244 | |
| Manufacturer number | 213131 HART | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
50
H
40
H
35
H
30
K
300
Description
Version:
Flat cutting edge length: 1.5 mm, for high surface quality.
Note:
Standard application values for ae = 0.5 ... 1×D / ap max = 1.4 mm.