{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SOMT 120508 PDER, for Softcut® HSI, HB8630
Article no.: 613557
Catalog no.: 214878
Article code:
Product details
Technical Data
| Manufacturer’s designation | SOMT 120508 PDER | |
| Base form | square | |
| Thickness of insert S | 5.56 mm | |
| Length of cutting edge l | 12.7 mm | |
| Height of cutting edge | 5.142 mm | |
| Diameter of insert d | 12.7 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 90 degrees | |
| Rake angle | 25 degrees | |
| Setting angle | 90 degrees | |
| Normal clearance angle (main cutting edge) | 15 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 15 degrees | |
| Normal clearance angle (flat cutting edge) | 15 degrees | |
| ISO-Code | SOMT 120508 PDER | |
| Max. cutting depth ap max | 6 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | HB8630 | |
| Coating | TiAlN | |
| Grade | HB8630 | |
| Insert thickness T | 5.56 mm | |
| Insert designation | SOMT 120508 PDER | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | right-hand | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | shoulder milling (FEC) | |
| Finishing / roughing assignment | roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Weight | 7 g | |
| Content | single part | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 613557 | |
| Catalog number | 214878 | |
| EAN / GTIN | 4045197747907 | |
| Manufacturer number | 214878 INOX | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
120
M
100
Description
Version:
Increased insert thickness for the highest metal removal rates. Protected against wear by the latest coating.
Note:
Standard application values for ae = 0.3×D.