{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Softcut HSI, with threaded shank, ⌀ D / number of teeth Z: 32/4mm
Article no.: 613560
Catalog no.: 214904
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Insert designation | SO.. 0836.. | |
| Usable length | 6 mm | |
| Overall length | 40 mm | |
| Cutting direction | right-hand cutting | |
| Machining method | End milling | |
| Cutter diameter min. | 32 mm | |
| Max. cutting edge length | 6 mm | |
| Setting angle | 90 degrees | |
| Number of effective cutters peripheral side | 4 | |
| Tool version | solid steel | |
| Spacing of the cutters | unequal spacing | |
| Tool exchange | PowerCard | |
| Type of product | End / face mill | |
| Mounting thread | M16 | |
| Recommended tightening torque | 2 Nm |
Identification & Classification
| Article number | 613560 | |
| Catalog number | 214904 | |
| EAN / GTIN | 4045197750686 | |
| Manufacturer number | 214904 32/4 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Wear-resistant heat-treated steel with corrosion-inhibiting coating. Precise indexable insert seating by use of appropriate torque. Wide and close tooth pitches for individual milling strategies.
Application:
Particularly suitable for machines with lower drive power and for machining at greater depths and small entry diameters.