{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling APMT 133524 ER, for Softcut® mills, HB8630
Article no.: 613596
Catalog no.: 215398
Article code:
Product details
Technical Data
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cooling lubricant | yes | |
| Series | Softcut® | |
| Base form | rectangular | |
| Width of insert B | 7 mm | |
| Thickness of insert S | 3.58 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 12 mm | |
| Corner radius R | 2.4 mm | |
| Corner chamfer length C | 0.1 mm | |
| Corner chamfer angle | 90 degrees | |
| Corner angle | 90 degrees | |
| Rake angle | 28 degrees | |
| Normal clearance angle (main cutting edge) | 11 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 11 degrees | |
| Normal clearance angle (flat cutting edge) | 21 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | APMT 133524 ER | |
| Cutting depth ap, min. | 0.1 mm | |
| Tool material | Carbide | |
| Coating | TiAlN | |
| Grade | HB8630 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 2 pcs. | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | M | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Weight | 2 g | |
| Content | 1 pcs. | |
| Correction factor fz | 2.5 |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 613596 | |
| Catalog number | 215398 | |
| EAN / GTIN | 4045197747686 | |
| Manufacturer number | 215398 INOX | |
| Article class | 21A | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
170
M
130
Description
Note:
Standard application values for ae = 0.25×D / ap = 4 mm, ap max = 6 mm.