{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
ET collet with radial compensation for tapping and reaming, ET 32, Nominal clamping ⌀ d: 11mm
Article no.: 614460
Catalog no.: 309448
Article code:
Product details
Technical Data
| Holder | ET 32 | |
| Clamping diameter | 11 mm | |
| External diameter | 33 mm | |
| Length of collet | 42.5 mm | |
| Standard | works standard | |
| Surface | ground | |
| Clamping profile | round | |
| With axial compensation | yes | |
| Axial compensation | 0.1 mm | |
| With radial compensation | yes | |
| Radial compensation (reaming) | 0.1 mm | |
| Radial compensation (thread tapping) | 0.5 mm | |
| Collet version | dead length collet | |
| Type of product | collet | |
| Content | single part |
Identification & Classification
| Article number | 614460 | |
| Catalog number | 309448 | |
| EAN / GTIN | 4045197783165 | |
| Manufacturer number | 309448 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Hardened and ground.
Advantage:
The radial compensation allows correction of slight centring errors (for the required concentricity and thread or fit quality). Axial compensation of 0.1 mm.
Application:
For tapping and reaming on milling and turning centres.
Suitable for:
All standard ER collet chucks.
Note:
Clamps only the nominal ⌀. Not compatible with the CENTRO P precision ER collet chuck.