{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
High-speed spindle type 625S compact, slim, HSK-A 63, Speed: 50000min-1
Article no.: 614616
Catalog no.: 358875
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Interface position | on the machine; on the workpiece | |
| Holder type, joint 1 | hollow shank taper HSK | |
| Holder type, joint 2 | collet taper | |
| Interface coding | HSK06301085; SZD01100105 | |
| Holder version | dimensionless nominal size without cooling | |
| Holder size, no dimensions | 63 | |
| Type of mounting | spigot | |
| Length of shank LS | 55 mm | |
| Cooling lubricant | no | |
| Manufacturer’s designation | 625S | |
| Interface on machine side | HSK-A 63 | |
| Gauge length A | 177 mm | |
| External diameter, on the tool side D | 57.15 mm | |
| Max. speed | 50’000 min-1 | |
| Machining strategy | HSC | |
| Format | compact; slim | |
| Interface | joint 1; joint 2 | |
| Type of product | high-speed spindle | |
| Overall length L | 215 mm | |
| Overall height H1 | 57.15 mm | |
| Overall width B1 | 57.15 mm | |
| Standard | DIN 69893 | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 614616 | |
| Catalog number | 358875 | |
| EAN / GTIN | 2050001871725 | |
| Manufacturer number | 65065 | |
| Article class | 33I |
Description
Version:
Air-powered high-speed spindle, constant speed under load 25,000 − 65,000 rpm. depending on the version. Power up to 1kW.
Advantage:
- Higher machining speeds with smaller tools.
- Protects the machine - speed is generated by the high-speed spindle - the machine spindle is stationary.
- Integral air cooling permits continuous use. No standstill times.
- Longer tool life.
- Very good surface quality of the tools - less requirement for regrinding.
Application:
High-speed spindles allow higher cutting speeds and feed rates. They allow above all the use of tools with small diameters (6 mm).
Supplied with:
High-speed spindle, collet, collet clamping nut, wrench, sealing plug, air filter, connection hose.
Optional extras:
Tool-change turret for automatic tool-change. Required only for external air supply - available on request.
Note:
Use clean dry compressed air at approx. 6.2 bar.
Further spindles available on request: all commonly-used shank versions, different performance classes and speeds.
Further spindles available on request: all commonly-used shank versions, different performance classes and speeds.