{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Carbide circular saw blade only for stainless steel ⌀ 355×25.4 mm for stainless steel, Number of teeth: 90
Article no.: 615392
Catalog no.: 078236
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 355 mm | |
| Diameter of mounting hole | 25.4 mm | |
| Cutting width | 2 mm | |
| ISO milling cutter type | Shell end mills | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) | 90 | |
| Corner version | as radius | |
| Tool material | Carbide | |
| Coating | coated | |
| Cutting direction | right-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade |
Identification & Classification
| Article number | 615392 | |
| Catalog number | 078236 | |
| EAN / GTIN | 4260052463895 | |
| Manufacturer number | 600570 NSF | |
| Manufacturer/responsible person | JEPSON Power GmbH, Ernst-Abbe-Straße 5, 52249 Eschweiler, Germany, www.jepson.de |
Description
Version:
Carbide-tipped circular saw blade for precise cutting.
Specially coated for stainless steel.
- Safety at work: Thin-walled, low-vibration, reduced noise.
- Extremely long working life.
- High-quality cutting.
- Can be resharpened 5×.
- General-purpose use for steel, plastic, and non-ferrous metals (not No. 078236).
Specially coated for stainless steel.
Note:
Other special saw blades for aluminium, stainless steel, for example, are available on request.