{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
MFH Harrier high feed rate milling cutter with plain shank, for indexable inserts SO..
Article no.: 616165
Catalog no.: 222050
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, radial | |
| Cooling lubricant | yes | |
| Series | MFH Harrier | |
| Manufacturer’s designation | Hochvorschubfräser MFH Harrier mit Zylinderschaft | |
| Interface position | on the machine | |
| Holder type | plain shank | |
| Shank diameter DS | 32 mm | |
| Length of shank LS | 100 mm | |
| Cutter diameter min. Dc | 40 mm | |
| Neck diameter D1 | 23 mm | |
| Relief angle | 10 degrees | |
| Ramp distance Lp | 22.4 mm | |
| Number of cutters peripheral side Z | 4 | |
| Number of indexable inserts | 4 | |
| Interface | joint 1 | |
| Gauge length A | 50 mm | |
| Usable length L1 | 20 mm | |
| Overall length L | 150 mm | |
| Functional length | 150 mm | |
| Max. speed | 11’500 min-1 | |
| Weight | 962 g | |
| Cutting direction | right-hand cutting | |
| Machining method | circular milling (round milling) (FZI); countersinking (plunge milling) (FSE); face milling (FPL); slot milling (FNU) | |
| Machining strategy | HPC | |
| Type of product | Copy milling cutter | |
| suitable indexable insert | SOMT1004 | |
| Max. cutting depth L2 | 1.5 mm; 3.5 mm |
Identification & Classification
| Article number | 616165 | |
| Catalog number | 222050 | |
| EAN / GTIN | 4960664707522 | |
| Manufacturer number | THN07617 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.