{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
MFH Harrier high feed rate milling cutter with Weldon shank, for indexable inserts SO..
Article no.: 616171
Catalog no.: 222055
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, radial | |
| Cooling lubricant | yes | |
| Series | MFH Harrier | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 0320 mm | |
| Holder tolerance class | h6 | |
| Shank diameter | 32 mm | |
| Shank length | 61 mm | |
| Shank type | HE | |
| Cutter diameter min. | 32 mm | |
| Setting angle | 10 degrees | |
| Relief angle | 10 degrees | |
| Plunge angle max. | 4 degrees | |
| Plunge depth max. | 1.5 mm | |
| Ramp distance | 14.4 mm | |
| Number of cutters peripheral side | 3 | |
| Number of indexable inserts | 3 | |
| Shank type | Weldon shank | |
| Diameter of shaft | 32 mm | |
| Interface | joint 1 | |
| Gauge length | 70 mm | |
| Usable length | 20 mm | |
| Overall length | 131 mm | |
| Max. speed | 14’000 min-1 | |
| Weight | 724 g | |
| Cutting direction | right-hand cutting | |
| Machining method | circular milling (round milling); countersinking (plunge milling); face milling; slot milling | |
| Machining strategy | HPC | |
| Type of product | End / face mill | |
| Content | single part | |
| Max. cutting depth | 1.5 mm; 3.5 mm |
Identification & Classification
| Article number | 616171 | |
| Catalog number | 222055 | |
| EAN / GTIN | 4960664707546 | |
| Manufacturer number | THN07633 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Description:
MFH Harrier high feed rate indexable face mills enable short machining times thanks to high feed rates and high cutting depths. The approach angle in combination with the convex cutting edges reduces the cutting forces and minimises the tendency to vibrate.
Application:
For increased productivity in face milling, pocket milling and slot milling. Because the cutting forces are so low, large overhangs for plunge milling pose no problem.