{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre 60° / 30°, Morse taper: 2
Article no.: 616650
Catalog no.: 320658
Article code:
Click to enlarge image
Click to enlarge image
Extended point for unobstructed access to the turning tool.
Click to enlarge image
Click to enlarge image
Click to enlarge image
Product details
Technical Data
| Overall length | 150 mm | |
| Head diameter | 45 mm | |
| Type of centring point | tracking | |
| Point angle | 30 degrees; 60 degrees | |
| Bull-nosed taper at front | no | |
| Point length | 37 mm | |
| Mounting machine-side | MK2 | |
| With push-off thread | no | |
| With clamping faces | no | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Usable length | 87 mm | |
| Max. workpiece weight | 140 kg | |
| Maximum speed | 5,000 min-1 | |
| Maximum radial run-out | 0.005 mm | |
| Half centring point | no | |
| Use | turning | |
| Weight | 0.6 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 616650 | |
| Catalog number | 320658 | |
| EAN / GTIN | 4045197774187 | |
| Manufacturer number | 320658 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Punch axis of through-hardened steel mounted on shank bearings.
- Live centre through hardened, multiple regrinding possible.
- Precision roller bearings for high concentricity.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
- Complete tool hardened and ground.
With extended centre, point angle 60° / 30°.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For all types of lathe, equally suitable for roughing and finish turning.
The extended point allows the turning tool unobstructed access to the end face of the component. Particularly suitable for copy turning.
The extended point allows the turning tool unobstructed access to the end face of the component. Particularly suitable for copy turning.