{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Revolving lathe centre for interchangeable heads, Morse taper: 3
Article no.: 616665
Catalog no.: 321265
Article code:
Product details
Technical Data
| Overall length | 155 mm | |
| Head diameter | 12 mm | |
| Type of centring point | tracking | |
| Bull-nosed taper at front | no | |
| Point length | 56 mm | |
| Head length | 73 | |
| Mounting machine-side | MK3 | |
| With push-off thread | yes | |
| Draw-off nut included | yes | |
| With clamping faces | yes | |
| With carbide tip | no | |
| With shock absorbing | no | |
| Usable length | 52 mm | |
| Max. workpiece weight | 400 kg | |
| Maximum speed | 12,000 min-1 | |
| Maximum radial run-out | 0.005 mm | |
| Half centring point | no | |
| Replaceable centring points included | yes | |
| With pressure indicator | no | |
| Use | turning | |
| Weight | 1.3 kg | |
| Type of product | centring drill |
Identification & Classification
| Article number | 616665 | |
| Catalog number | 321265 | |
| EAN / GTIN | 4045197774446 | |
| Manufacturer number | 321265 3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- With extended centre and draw-off nut, specially for CNC machines.
- Complete tool hardened and ground.
- Special roller bearings for high loads and speeds.
- Live centre through hardened, can be reground many times.
- Maintenance-free due to lifetime lubrication.
- Special seal prevents ingress of dirt and coolant.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For high loads and speeds, specially for NC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Flexible application thanks to exchangeable inserts. For general use on turrets and counter-spindles on CNC machines.
Optional extras:
Note:
Draw-off nut for NC machines to remove tip from tailstock sleeve.
Changing the inserts in the key surfaces by counter-rotation.
Changing the inserts in the key surfaces by counter-rotation.