{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Weldon element with compensation, short, For nominal ⌀ d: 3,5mm
Article no.: 616685
Catalog no.: 335720
Article code:
Product details
Technical Data
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | no | |
| Manufacturer’s designation | Weldonelement mit Ausgleich, kurz | |
| Interface position | on the machine; on the workpiece | |
| Holder type | plain shank; plain shank | |
| Interface coding | ZYL01201015; ZYL00350105 | |
| Holder version | metric; metric | |
| Holder size, metric | 12 mm; 3,5 mm | |
| Type of mounting | spigot; hole (internal mounting) | |
| Shank diameter DS | 12 mm; 3.5 mm | |
| Shank type | HB | |
| Interface on machine side | plain shank | |
| Min. clamping diameter D1 | 3.5 mm | |
| Max. clamping diameter D1 | 3.5 mm | |
| Gauge length A | 36 mm | |
| Length compensation by compression | 0.2 mm | |
| Length compensation by tension | 0.2 mm | |
| Format | short | |
| suitable for tapping | yes | |
| Interface | joint 1; joint 2 | |
| Type of product | quick-change chuck | |
| Overall length L | 45 mm | |
| Through-coolant available | no | |
| Material | steel | |
| Surface treatment | ground; hardened | |
| Weight | 0.032 kg | |
| Content | 1 pcs. | |
| For tap shank diameter | 3.5 mm |
Identification & Classification
| Article number | 616685 | |
| Catalog number | 335720 | |
| EAN / GTIN | 4045197801456 | |
| Manufacturer number | 335720 3,5 | |
| Article class | 32P | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Plain toolholder, hardened and ground with quick-release coupling. Internal square to take taps and transmit the torque. Clamping mechanism prevents the tap being pulled out.
Tensile/compression compensation each of 0.2 mm by means of compensation element. Clamping of the Weldon element either by means of the drive flats or the compensation element.
Tensile/compression compensation each of 0.2 mm by means of compensation element. Clamping of the Weldon element either by means of the drive flats or the compensation element.
Advantage:
- Attractively priced solution.
- Sturdy, slim version.
- Variation in the clamping and overhang lengths.
Application:
To take taps and others in a Weldon arbor.
Optional extras:
Compensation element No. 335730.