{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Pair of welder's safety gloves, Glove size: 11
Article no.: 638238
Catalog no.: 094128
Article code:
Product details
Technical Data
| Suitable for welding method, welding protection | MIG / MAG welding | |
| Contents pairs | 1 pair | |
| Version, EN 388 | EN388:2016 | |
| Resistance to abrasion | 4 | |
| Resistance to cuts (Coupe test) | 2 | |
| Tear propagation resistance | 4 | |
| Resistance to penetration | 4 | |
| Resistance to cuts (TDM) | X | |
| Impact protection | not defined | |
| A: Behaviour when exposed to fire, EN 407 | 4 | |
| B: Contact heat, EN 407 | 1 | |
| C: Convection heat, EN 407 | 2 | |
| D: Radiated heat, EN 407 | 1 | |
| E: small molten spatters, EN 407 | 4 | |
| F: large molten spatters, EN 407 | X | |
| Type, EN 12477 | type A | |
| Type of leather | grain leather; split leather | |
| Animal, split leather | cattle | |
| Animal, grain leather | cattle | |
| Thickness | 1 mm | |
| EN 407 code | 41214X | |
| EN 388 code | 4244X | |
| Colour | grey | |
| Type of product | gloves | |
| Area of application | heat protection; welding protection | |
| Glove size | 11 | |
| Scope of application | all-round | |
| Reuse | reusable | |
| Unit | pair | |
| Standard | EN 12477; EN 388; EN 407 | |
| Backing material | leather | |
| Coating | no coating | |
| Characteristics | DMF free; free of latex; silicone-free | |
| Protection category | II | |
| Overall length L | 345 mm | |
| Total weight | 220 g | |
| Content | pair |
Identification & Classification
| Article number | 638238 | |
| Catalog number | 094128 | |
| EAN / GTIN | 4045197890474 | |
| Manufacturer number | 094128 11 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Welder’s gloves of combined full-grain and split grain leather. With additional wrist protection.
Note:
The minimum order quantity corresponds to one pack unit quantity (VPE) or a multiple thereof.
Warning:
Intended use
Reasonably foreseeable misuse
- Protect hands against mechanical risks, abrasion, blisters, and other superficial injuries.
- For the MIG/MAG welding process.
- Optimum protection is obtained only when the area to be protected is completely covered. Where gloves have fastenings, check that these are securely closed. Protective gloves must not be allowed to slip. Select a suitable glove size.
Reasonably foreseeable misuse
- Offer no protection against chemical, microbiological, electrical or laceration risks.
- Do not wear when close to rotating machine parts.
- Combination with other protective equipment must not impair the protective effect and must not hinder the wearer in his activities.