{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
GARANT Master Steel Feed solid carbide drill, plain shank DIN 6535 HB, TiAlN, ⌀ DC h7: 9,8mm
Article no.: 643814
Catalog no.: 123236
Article code:
Product details
Technical Data
| Through-coolant | yes, with 25 bar | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | Master Steel | |
| Wet maximum | suitable | |
| Manufacturer’s designation | GARANT Master Steel Feed VHM-Bohrer | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL | |
| Interface coding, according to ISO TS 13399-60 | ZYL01001015 | |
| Holder shape | form B | |
| Holder version | metric with cooling lubricant holes | |
| Holder size, metric | 0100 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 10 mm | |
| Shank length | 40 mm | |
| Shank type | HB | |
| Air | suitable only under restricted conditions | |
| Cutter diameter, min. | 9.8 mm | |
| Cutter diameter, max. | 9.8 mm | |
| Configurable | no | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance class ISO | h7 | |
| Flute length | 120 mm | |
| Distance from cutter corner to cutter tip | 1.544 mm | |
| Number of teeth | 3 | |
| Twist direction | right-hand | |
| Helix angle, min. | 30 degrees | |
| Angle, 1st step | 140 degrees | |
| Product designation (type) | N | |
| Pilot drill required | yes | |
| Tool material | solid carbide | |
| Cutting media, manufacturer’s designation | VHM TiAlN | |
| Coating | TiAlN | |
| Interface | joint 1 | |
| Gauge length | 122 mm | |
| Usable length | 110 mm | |
| Overall length | 162 mm | |
| Functional length | 110 mm | |
| Weight | 152 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | drilling into solid material | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | indexable drill | |
| Content | single part |
Identification & Classification
| Article number | 643814 | |
| Catalog number | 123236 | |
| EAN / GTIN | 4045197843036 | |
| Manufacturer number | 123236 9,8 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
120
P
110
P
100
P
90
P
70
H
60
M
55
M
50
S
40
K
120
K
80
Description
Version:
3-flute drill, specially developed for use at very high feed rates. Outstandingly suitable for machines with high installed power and stable machining conditions.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
- Special cutter geometry with stable cutting edges and large clearance at the centre enables very high feed rates.
- The patented tip is optimised for chip flow and generates low cutting pressure with good chip breakage.
The sector-leading technology of the drill point guarantees optimum self-centring behaviour. 3 guide chamfers guarantee a stable exit from the hole and an exact roundness of the hole.
Note:
Flute length LC = L2 + 1.5 × DC.
For process reliability when using the 12×D deep-hole drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.
For process reliability when using the 12×D deep-hole drill, an initial centre drilling with an NC spotting drill No. 121130 with 155° point angle is necessary.