{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade, uncoated, ⌀×thickness: 100X3mm
Article no.: 644115
Catalog no.: 179930
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 100 mm | |
| Diameter of mounting hole | 16 mm | |
| Cutting width | 3 mm | |
| ISO milling cutter type | double-sided side milling cutter | |
| Setting angle | 0 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Tooth form | Aw | |
| Number of cutters (peripheral side) | 26 | |
| Tooth pitch | 12.09 mm | |
| Corner version | sharp-edged | |
| Number of diameters of hole circle | 1 | |
| Tool material | Carbide | |
| Cutting media, manufacturer’s designation | HM | |
| Coating | uncoated | |
| Usable length | 34 mm | |
| Overall length | 3 mm | |
| Functional length | 3 mm | |
| Weight | 130 g | |
| Cutting direction | left-hand cutting | |
| Tool version | steel support with soldered hard material cutter inserts to DIN ISO 513 (Hx, Cx, Bx, Dx) | |
| Standard | DIN4000-83 | |
| Machining method | parting-off milling (FTR) | |
| Type of product | circular saw blade | |
| Correction factor fz | 1.5 | |
| Cutting depth min. | 3 mm | |
| Max. cutting depth | 34 mm |
Identification & Classification
| Article number | 644115 | |
| Catalog number | 179930 | |
| EAN / GTIN | 4045197887108 | |
| Manufacturer number | 179930 100X3 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
150
P
125
P
110
P
80
Description
Version:
GARANT carbide-tipped circular saw blade for extra deep saw cuts. Unequal spacing of the saw blade teeth for smooth cutting. We recommend radial feed to minimise vibration and increase the working life of the saw blade.
Carbide substrate. Tooth form and number of teeth specially configured for machining steel. Very well suited even for steel < 1100 N/mm2.
Carbide substrate. Tooth form and number of teeth specially configured for machining steel. Very well suited even for steel < 1100 N/mm2.