{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Solid carbide milling cutter MTC, uncoated, ⌀ DC: 2mm
Article no.: 644272
Catalog no.: 202244
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL00600105 | |
| Holder shape | Standard | |
| Holder version | metric | |
| Holder size, metric | 6 mm | |
| Dry machining | suitable only under restricted conditions | |
| Type of mounting | spigot | |
| Holder tolerance class | h$06 | |
| Shank diameter | 6 mm | |
| Shank length | 36 mm | |
| Holder diameter, ISO tolerance class | 6 mm | |
| Holder diameter, lower dimension | -0.008 mm | |
| Oil | suitable | |
| Shank type | HA | |
| Air | suitable | |
| Tool material | solid carbide | |
| Standard designation for cutting medium, 2nd Priority | solid carbide | |
| Standard designation for cutting medium, 3rd Priority | solid carbide | |
| Machining group | N (non-ferrous metals) | |
| Cutting media, manufacturer’s designation | VHM | |
| Coating | uncoated | |
| Cutter diameter | 2 mm | |
| Tolerance of cutter diameter | tolerance class ISO | |
| Tolerance Class | e8 | |
| Cutting edge length | 5 mm | |
| ISO milling cutter type | L | |
| Balancing quality | G 2,5 | |
| Relief angle | 5 degrees | |
| Side rake angle | 7 degrees | |
| Number of effective cutters, peripheral side | 3 | |
| Number of effective cutters, end face | 3 | |
| Twist direction | right-hand | |
| Twist angle | 45 degrees | |
| Helical pitch | 6.283 mm | |
| Corner / edge | 1 | |
| Corner version | sharp-edged | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 21 mm | |
| Usable length | 5 mm | |
| Overall length | 57 mm | |
| Functional length | 5 mm | |
| Max. speed | 45,000 min-1 | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | DIN 6527 | |
| Data carriers | without data carrier | |
| Machining method | End milling; face milling; slot milling | |
| Colour ring | yellow | |
| Machining strategy | MTC | |
| Type of product | shoulder mill | |
| Correction factor fz | 3 | |
| Cutting depth min. | 0.01 mm | |
| Max. cutting depth | 1 mm; 5 mm |
Identification & Classification
| Article number | 644272 | |
| Catalog number | 202244 | |
| EAN / GTIN | 4045197858085 | |
| Manufacturer number | 202244 2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
190
N
150
N
120
N
180
N
130
N
150
N
130
N
110
N
180
N
120
N
150
Description
Version:
Eccentric relief ground, additionally polish ground in the flutes for outstanding chip evacuation in long-chipping aluminium workpieces.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Without 45º corner chamfer.
Without 45º corner chamfer.
Size 1–2 – tolerance: Size nominal ⌀ DC = e8.
Size 2.5–20M – tolerance: Size nominal ⌀ DC = h6.
Application:
Especially for MTC (Multi Task Cutting) use on the new generation of turning / milling centres.
Note:
NEW GENERATION AVAILABLE! Recommended successor product is No. 202002.