{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
HiPer Drill base body, 10×D, ⌀ DC: 26mm
Article no.: 645401
Catalog no.: 231617
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | HiPer Drill | |
| Manufacturer’s designation | HiPer-Drill Grundelement | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL03201115 | |
| Holder shape | with longitudinal slot | |
| Holder version | metric | |
| Holder size, metric | 0320 mm | |
| Type of mounting | flat toothing | |
| Shank diameter | 32 mm | |
| Shank length | 60 mm | |
| Cutter diameter, min. | 26 mm | |
| Distance from cutter corner to cutter tip | 4.7 mm | |
| Attachment length, holder | 284.3 mm | |
| Number of cutting edges, total | 2 | |
| Twist angle | 13 degrees | |
| Adjustment range | setting not possible | |
| Angle, 1st step | 135 degrees | |
| Insert thickness | 9.4 mm | |
| Interface coding for insert | HOG-HPIE260000 | |
| Insert designation | 231640 26 | |
| Interface | joint 1 | |
| Gauge length | 308 mm | |
| Usable length | 270 mm | |
| Overall length | 368 mm | |
| Weight | 1’040 g | |
| Cutting direction | right-hand cutting | |
| Tool version | solid steel | |
| Standard | DIN 4000-86 | |
| Machining method | drilling into solid material | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 645401 | |
| Catalog number | 231617 | |
| EAN / GTIN | 4045197869074 | |
| Manufacturer number | 231617 26 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- Very high feed rates and maximum performance due to optimally matched geometries and materials.
- Precise positioning of the cutter insert due to Vee insert seating and secure clamping by the centre bore.
- High concentricity when assembled.
- Shank support for optimum stability in operation.
Polished flutes.
Application:
For stationary and rotating use. For holes up to IT9 accuracy.
Note:
Further sizes up to ⌀ 50.99 mm available on request.
The insert screw must be replaced after every fifth change of cutter insert.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Reduce feed rates f by 10 % and vc values by 30 %.
The insert screw must be replaced after every fifth change of cutter insert.
For process reliability when using the drill, initial pilot drilling to 1.5×D with the drill No. 231600 with the same cutter insert size and type is necessary. The generation of a pilot hole improves process reliability.
Clamp in a hydraulic chuck (such as No. 302026 size 20) for optimum radial run-out.
For optimum stability, clamp the drill so the overhang is as short as possible.
Reduce feed rates f by 10 % and vc values by 30 %.