{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. Nr.:
Keyway broaching toolholder, long ⌀ DS 32 mm, from slot width m: 18mm
Article no.: 646100
Catalog no.: 290353
Article code:
- Through-coolant: yes
Product details
Technical Data
| Shank ⌀ | 32 mm | |
| Through-coolant | yes | |
| suitable for slot width m | 18 mm; 20 mm; 22 mm; 25 mm | |
| Reach L1 | 200 mm | |
| Tool holder ⌀ D1 | 40 mm | |
| Centre offset L3 | 23 mm | |
| Min. pre-drilling -⌀ Dmin | 44.7 mm; 45.08 mm; 45.5 mm; 46.18 mm | |
| Screw | 290399 4 | |
| Shank length Ls | 100 mm | |
| Shank | Combination shank | |
| Type of product | Keyway broaching and profile slotting tool |
Identification & Classification
| Article number | 646100 | |
| Catalog number | 290353 | |
| EAN / GTIN | 4045197881076 | |
| Manufacturer number | 290353 18 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Attention:
Always use the minimum pre-drill ⌀ to match the slot width (e.g. for slot width 14 mm, minimum pre-drill ⌀ = 38.22 mm).
Note:
- Individual holder sizes are for different slot widths. In such cases, where possible, always use the optimum combination of holder and cutting insert (identical size) for maximum stability.
- For lathes without Y-axis, please use eccentric bush No. 290391− 290393 for exact setting of the Y-coordinate.
- For machining centres, use the alignment aid No. 290397 and a dial indicator to check the spindle orientation.