{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Endoscope probe, elbow bend, flexible, 4.5 mm ⌀, Probe length: 1500mm
Article no.: 646772
Catalog no.: 492944
Article code:
Product details
Technical Data
| IP index of protection | IP67 | |
| Manoeuvring angle max. | 180 degrees | |
| Length of probe | 1’500 mm | |
| Diameter of probe | 4.5 mm | |
| Camera resolution | 640×480 px | |
| Direction of view max. | 0 degrees | |
| Image aperture angle min. | 90 degrees | |
| Image aperture angle max. | 90 degrees | |
| Light source | lED lamp | |
| Index of protection / protection class | IP degree of protection | |
| Type of product | probe |
Identification & Classification
| Article number | 646772 | |
| Catalog number | 492944 | |
| EAN / GTIN | 4045197893772 | |
| Manufacturer number | 492944 1500 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
Sturdy watertight probe head (IP67) of stainless steel with dimmable white LEDs. Direction of view 0°.
2× 180° flexible probe head: Probe with hand grip and setting handle for bending the camera head in two directions (maximum 2× 180°). For inspection of voids opposite the direction of entry of the probe, no additional probe mirror is needed. A stop function for the desired angular position allows non-fatiguing working. Complete probe with metal-braided protective hose, particularly resistant. Image aperture angle 90°.
2× 180° flexible probe head: Probe with hand grip and setting handle for bending the camera head in two directions (maximum 2× 180°). For inspection of voids opposite the direction of entry of the probe, no additional probe mirror is needed. A stop function for the desired angular position allows non-fatiguing working. Complete probe with metal-braided protective hose, particularly resistant. Image aperture angle 90°.
Function:
IP67: Protected against intermittent immersion in water and protected against penetration by dust (dust-tight), also completely protected against touching.
Application:
Ideal for inspection of voids where access is difficult, e.g. automotive: Engine, gearbox, fuel tank, bodywork, dashboard, appraisal. Aerospace: engines, turbines, pipework, and wiring systems. Buildings: Assessment of the structure of buildings, water damage, pest infestation. Pipework systems: weld seams, traces of foreign bodies, leaks. Hydraulic systems: cylinders, leaks. Heating - sanitation - air conditioning: ovens, furnaces, boilers, air conditioning systems, drainage systems. Pest control: Bees' nests, wasps' nests, birds' nests, insect entry points. Police, customs: Vehicle checking, goods checking.
Suitable for:
Note:
Other types of probe (up to 30 m) with other probe head ⌀ and directions of view available on request.
Warning:
Intended use
Reasonably foreseeable misuse
- For checking, inspecting and investigating inaccessible and out of sight areas.
- For mounting on an endoscope.
- The probe head can be used in unleaded petrol, machine oil, diesel, brake fluid (DOT 4), gear oil and neutral cleaner.
- For both industrial and private use.
- Use only when it is technically in good condition and safe to operate.
- Use exclusively approved Hoffmann Group accessories for modification or rebuilding.
Reasonably foreseeable misuse
- Do not subject it to blows, impacts or heavy loads.
- Do not bend the probe through more than 180°.
- Do not use the probe head as a hook.
- Rotate the probe only by means of the rotary wheel, not directly at the probe head.
- Do not use in explosion hazard areas.
- Do not use in environments with flammable gases, vapours or solvents, such as in fuel or gas tanks.
- Do not open the casing.
- Do not make any unauthorised modifications.
- Do not expose the work lamp to intense heat, direct sunlight or naked flames.