{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Disc brush, ceramic grit (CER), ⌀ 144 mm, Grit: 120
Article no.: 646849
Catalog no.: 575038
Article code:
Product details
Technical Data
| Diameter of hole | 32 mm | |
| Material of base body | plastic | |
| Material of bristle set | nylon | |
| Type of bristle set material | micro-abrasive | |
| Height of bristle set H1 | 43 mm | |
| With groove | yes | |
| Min. infeed | 0.8 mm | |
| Max. infeed | 1.5 mm | |
| Application type | machine-operated | |
| Holder | longitudinal slot | |
| Max. speed | 2’500 min-1 | |
| Abrasive media | ceramic grit (CER) | |
| Grit | 120 | |
| Grit designation | medium | |
| Typical application | deburring; finish grinding | |
| Type of product | disc brush | |
| Content | single part |
Identification & Classification
| Article number | 646849 | |
| Catalog number | 575038 | |
| EAN / GTIN | 4045197892799 | |
| Manufacturer number | 575038 120 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
Description
Version:
Disc brushes with extremely tightly packed abrasive bristles (right to the edge of the brush) embedded in the plastic pad. The bristles support each other, giving a highly stable shape. Very long working life.
Nylon bristles with ceramic grit content. More aggressive abrasive effect.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Nylon bristles with ceramic grit content. More aggressive abrasive effect.
With longitudinal groove for clamping on face mill arbors (DIN 6357) and combination face mill adapters (DIN 6358).
Advantage:
- Workpiece rework directly after the machining process.
- Reproducible results due to constantly exposed grinding grit.
- Good process reliability thanks to high shape stability and shape accuracy.
- Quick and secure installation without further accessories.
- Very low radial run-out.
Application:
On CNC machining centres and when used by robots, preferably wet grinding with cooling lubricant. Machining of flat components: precise deburring, edge rounding, finish machining after milling, surface finishing e.g. of sealing and mating faces.
Note:
Special versions available on request.