{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
MFH micro high feed rate milling cutter with thread, for indexable inserts LPGT
Article no.: 647132
Catalog no.: 221943
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially angled | |
| Cooling lubricant | yes | |
| Interface position | on the machine | |
| Holder type | screw holder | |
| Nominal size of mounting thread | M8 | |
| Shank diameter DS | 8 mm | |
| Shank length LS | 18 mm | |
| Insert thickness T | 2,19 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | LPGT010210ER-GM | |
| Interface coding for insert according to ISO TS 13399-60 | LPGT010210ER-GM | |
| Insert designation | LPGT010210ER-GM | |
| Interface | joint 1 | |
| Gauge length A | 27 mm | |
| Usable length L1 | 8 mm | |
| Overall length L | 40 mm | |
| Max. speed | 11 400 min-1 | |
| Weight | 42 g | |
| Cutting direction | right-hand cutting | |
| Machining method | Copy milling; circular milling (round milling); countersinking (plunge milling) | |
| Machining strategy | HPC | |
| Cutter diameter min. D1 | 8 mm; 16 mm; 8 mm; 16 mm | |
| Cutter diameter max. D1 | 16 mm; 16 mm | |
| Head diameter D2 | 15,2 mm; 15,2 mm | |
| Max. cutting edge length | 6,26 mm; 6,26 mm; 6,26 mm; 6,26 mm | |
| Head length L | 8 mm; 8 mm | |
| Setting angle | 11 degrees; 11 degrees | |
| Relief angle | 5 degrees; 5 degrees | |
| Plunge angle max. αmax | 1,03 degrees; 1,03 degrees | |
| Plunge depth max. ae max | 11,1 mm; 11,1 mm | |
| Cutting direction | right-hand; right-hand | |
| Number of effective cutters (peripheral side) | 4; 4 | |
| Number of effective cutters (end face) | 4; 4 | |
| Number of insert mounting levels | 1; 1 | |
| Tool version | solid steel; solid steel | |
| Number of indexable inserts | 4; 4 | |
| Diameter of circular interpolation milling min. | 28 mm; 28 mm | |
| Diameter of circular interpolation milling max. | 30 mm; 30 mm | |
| Max. cutting depth ap | 0,5 mm; 0,5 mm | |
| Content | single part | |
| Type of product | Copy mill; Copy mill | |
| Mounting thread M | M6; M8 |
Identification & Classification
| Article number | 647132 | |
| Catalog number | 221943 | |
| EAN / GTIN | 4960664806737 | |
| Manufacturer number | THN08325 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Description
Version:
For extremely cost-effective machining due to high feed rates. Vibration is minimised by cutting force reduction.