{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Komet KUB Pentron® indexable drill with plain shank, for indexable inserts SOGX
Article no.: 647139
Catalog no.: 236614
Article code:
Product details
Technical Data
| Through-coolant | yes | |
| Entry of cooling lubricant | with cooling lubricant entry, axially concentric | |
| Escape of cooling lubricant | with cooling lubricant exit, axially concentric | |
| Cooling lubricant | yes | |
| Series | KUB Pentron® | |
| Manufacturer’s designation | KOMET KUB Pentron® Wendeplatten-Vollbohrer | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Interface coding | ZYL02001015 | |
| Holder shape | plain shank | |
| Holder version | metric | |
| Holder size, metric | 0200 mm | |
| Type of mounting | spigot | |
| Shank diameter | 20 mm | |
| Shank length | 50 mm | |
| Cutter diameter, min. | 14 mm | |
| Flute length | 37 mm | |
| Distance from cutter corner to cutter tip | 0.84 mm | |
| Number of cutting edges, total | 2 | |
| Twist angle | 10 degrees | |
| Angle, 1st step | 178 degrees | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | SO0402043N | |
| Insert designation | SOGX 040204 10-... | |
| Interface | joint 1 | |
| Gauge length | 41 mm | |
| Usable length | 28 mm | |
| Overall length | 91 mm | |
| Functional length | 36.16 mm | |
| Weight | 128 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 4000-86 | |
| Machining method | drilling into solid material | |
| Machining strategy | HPC | |
| Type of product | indexable drill for cutter inserts | |
| Content | single part |
Identification & Classification
| Article number | 647139 | |
| Catalog number | 236614 | |
| EAN / GTIN | 4047109278172 | |
| Manufacturer number | U42 01400 | |
| Manufacturer/responsible person | Ceratizit Besigheim GmbH, Zeppelinstraße 3, 74354 Besigheim, Germany, www.kometgroup.com |
Description
Version:
- Very high performance and long tool life thanks to optimised base body strength and special surface treatment.
- Best dimensional accuracy under very difficult drilling conditions.
- Stock costs reduced because internal and external inserts are identical.
- Offset-axis drilling is possible up to Vmax = 0.25 mm. Maximum ⌀ = D + 0.5 mm achievable by offsetting.
Bore tolerance: ⌀D − 0.1 / + 0.2
Application:
Supplied with:
Clamp screws (without indexable inserts).
Note:
Version 2×D and 3×D with ABS® also available on request in imperial sizes.
Version with PSC shank available on request.
Version with PSC shank available on request.