{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DCMX 11T304, for finish machining, Wiper
Article no.: 647417
Catalog no.: 260388
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | DCMX11T304WP CA510 | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | rhombic | |
| Wide insert | 5.08 mm | |
| Thickness of the insert | 3.97 mm | |
| Length of cutting insert | 11.6 mm | |
| Insert version | neutral | |
| Length of cutting edge | 11.6 mm | |
| Height of cutting edge | 3.97 mm | |
| Diameter of the cutting insert | 9.525 mm | |
| Corner radius | 0.4 mm | |
| Corner angle | 55 degrees | |
| Rake face chamfer width | 0 mm | |
| Rake face chamfer angle | 0 degrees | |
| Rake angle | 10 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| ISO-Code | DCMX 11T304 | |
| Attachment hole diameter | 4.7 mm | |
| Type of chip breaker | WP | |
| Wiper length axial | 0 mm | |
| Tool material | HC-P | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | CA510 | |
| Coating | CVD | |
| Grade | CA510 | |
| Insert thickness | 3.97 mm | |
| Type of fastening for insert | S (with counterbore screwed through hole) | |
| Interface coding for insert | DC11T3043N | |
| Interface coding for insert according to ISO TS 13399-60 | DC11T3043N | |
| Insert designation | DCMX11T304 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | continuous | |
| Weight | 5 g |
Identification & Classification
| Article number | 647417 | |
| Catalog number | 260388 | |
| EAN / GTIN | 4960664753154 | |
| Manufacturer number | TAA01731 | |
| Manufacturer/responsible person | KYOCERA UNIMERCO Tooling GmbH, Hammfelddamm 6, 41460 Neuss, Germany, www.kyocera-unimerco.de |
Application Table
P
P
P
P
P
