{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Fixed solid carbide lathe centre 60°, very large ⌀ / Morse taper: 44/5
Article no.: 648018
Catalog no.: 323200
Article code:
Product details
Technical Data
| Head diameter | 44.7 mm | |
| Type of centring point | fixed | |
| Point angle | 60 degrees | |
| Head length | 70.5 | |
| Mounting machine-side | MK5 | |
| With push-off thread | yes | |
| Draw-off nut included | no | |
| With clamping faces | no | |
| With carbide tip | yes | |
| With shock absorbing | no | |
| Maximum radial run-out | 0.001 mm | |
| Use | grinding | |
| Standard | DIN 806 | |
| Type of product | centring drill |
Identification & Classification
| Article number | 648018 | |
| Catalog number | 323200 | |
| EAN / GTIN | 4045197882455 | |
| Manufacturer number | 323200 44/5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Description
Version:
- High-precision solid carbide tip. Close-fitting carbide design for optimum stability and freedom from breakage, no additional safety equipment required.
- Tip angle 60°.
- High surface quality on the shank for optimum fit.
- Complete tool hardened and ground.
- With carbide tips for applications with high wear.
Description:
Lathe centres are mainly used on lathes to support long and slim workpieces, since with these workpieces there would otherwise be a risk of the workpiece bending or moving around as a result of the forces generated.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
The lathe centre is secured with a Morse taper. The workpiece is clamped in the chuck and a counterbore is added using a centre drill. After re-clamping, the lathe centre is then inserted.
Application:
For grinding high-precision components.
Optional extras:
Draw-off nut No. 323230.
Note:
Order the draw-off nut separately. Geometric dimensions to DIN 806 E.