{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Value pack HOLEX Pro Steel HPC solid carbide roughing end mill, 5 pieces
Article no.: 651805
Catalog no.: GG1414
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Series | Pro Steel | |
| Wet maximum | suitable | |
| Interface position | on the machine | |
| Holder type | Plain shank | |
| Holder version | metric | |
| Holder size, metric | 18 mm | |
| Dry machining | suitable | |
| Holder tolerance class | h6 | |
| Shank diameter | 18 mm | |
| Oil | suitable | |
| Shank type | HB | |
| Air | suitable | |
| Tool material | solid carbide | |
| Coating | TiAlN | |
| Cutter diameter | 17.5 mm | |
| Tolerance of cutter diameter | manufacturer tolerance | |
| Upper dimension | 0 mm | |
| Lower dimension | -0.03 mm | |
| Neck diameter | 17 mm | |
| Cutting edge length | 32 mm | |
| ISO milling cutter type | End / face mill | |
| Number of effective cutters, peripheral side | 3 | |
| Twist direction | right-hand | |
| Twist angle | 45 degrees | |
| Number of corner versions | 1 | |
| Corner / edge | 1 | |
| Corner version | as chamfer | |
| Corner chamfer width | 0.4 mm | |
| Corner chamfer angle | 45 degrees | |
| Spacing of the cutters | unequal spacing | |
| Direction of infeed | horizontal, oblique and vertical | |
| Number of clamping slots | 3 | |
| Helix angle characteristic | unequal spacing | |
| Interface | joint 1 | |
| Gauge length | 50 mm | |
| Usable length | 32 mm | |
| Overall length | 92 mm | |
| Functional length | 50 mm | |
| Cutting direction | right-hand cutting | |
| Tool version | solid carbide | |
| Standard | Werksnorm | |
| Machining method | End milling; face milling; slot milling | |
| Colour ring | green | |
| Machining strategy | HPC | |
| Type of product | shoulder mill | |
| Correction factor fz | 2 |
Identification & Classification
| Article number | 651805 | |
| Catalog number | GG1414 | |
| EAN / GTIN | 4045197908292 | |
| Manufacturer number | GG1414 17,5 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
240
P
220
P
170
P
150
M
80
K
190
Description
Version:
For roughing and finishing.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
Same as No. 202414.
Up to 1×D into solid material at very high feed rates with smooth cutting action.
Same as No. 202414.
Advantage:
Optimised flute form, eccentric relief ground, generous chip spaces.