{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
| Through-coolant |
no
|
|
| Entry of cooling lubricant |
without cooling lubricant entry
|
|
| Escape of cooling lubricant |
without cooling lubricant exit
|
|
| Wet minimum |
suitable
|
|
| Feed rate per tooth side milling fz |
0.025 mm
|
|
| Max. cutting depth, Full slot milling |
0.02 mm
|
|
| Max. cutting depth, Side milling |
0.04 mm
|
|
| Wet maximum |
suitable
|
|
| Cutting width max. ae |
0,5×D; 0,05×D
|
|
| Interface position |
on the machine
|
|
| Holder type, joint 1 |
plain shank
|
|
| Interface coding |
ZYL00400105
|
|
| Holder shape |
plain shank
|
|
| Holder version |
metric
|
|
| Dry machining |
suitable only under restricted conditions
|
|
| Holder tolerance class |
h5
|
|
| Diameter of shaft DS |
4 mm
|
|
| Length of shank LS |
32 mm
|
|
| Feed rate per tooth copy milling fz |
0.025 mm
|
|
| Shank type |
HA
|
|
| Air |
suitable
|
|
| Cooling lubricant |
yes
|
|
| Manufacturer’s designation |
VHM-Torusfräser R1 0,5, DLC
|
|
| Cutter diameter Dc |
2 mm
|
|
| Tolerance of cutter diameter |
manufacturer tolerance
|
|
| Upper dimension |
0 mm
|
|
| Lower dimension |
-0.005 mm
|
|
| Recess diameter D1 |
1.91 mm
|
|
| Cutting edge length Lc |
2 mm
|
|
| ISO milling cutter type |
toroidal bull nose end mill
|
|
| Transition angle α |
16 degrees
|
|
| Number of effective cutters (peripheral side) Z |
2
|
|
| Number of effective cutters (end face) Z |
2
|
|
| Twist direction |
right-hand
|
|
| Twist angle |
30 degrees
|
|
| Corner / edge |
1
|
|
| Corner version |
as radius
|
|
| Corner radius R |
0.5 mm
|
|
| Direction of infeed |
horizontal, oblique and vertical
|
|
| Number of clamping slots |
2
|
|
| Feed rate per tooth in |
alu short-chipping
|
|
| Tool material |
solid carbide
|
|
| Machining group |
N (non-ferrous metals); O (other)
|
|
| Tool application group |
W
|
|
| Cutting media, manufacturer’s designation |
VHM/TAC
|
|
| Coating |
DLC
|
|
| Interface |
joint 1
|
|
| Upper dimension of nominal diameter |
0 mm
|
|
| Lower dimension of nominal diameter |
-0.005 mm
|
|
| Gauge length A |
40 mm
|
|
| Usable length L1 |
40 mm
|
|
| Overall length L |
80 mm
|
|
| Functional length |
2 mm
|
|
| Max. speed |
45’000 min-1
|
|
| Cutting direction |
right-hand cutting
|
|
| Tool version |
solid carbide
|
|
| Standard |
Werksnorm
|
|
| Machining method |
circular milling (round milling) (FZI); copy milling; form milling (die milling) (FFO); hobbing (FWA); profile milling (FPR); slot drilling (keyway cutting) (FNB); slot milling (FNU)
|
|
| Colour ring |
yellow
|
|
| Type of product |
die milling cutter
|
|
| Content |
single part
|
|
| Correction factor fz |
1
|
|
| Cutting depth min. |
0.01 mm
|
|
| Cutting depth in use |
Full slot milling; Side milling; copy milling
|
| Article number | 653175 | |
| Catalog number | 206045 | |
| EAN / GTIN | 4045197915696 | |
| Manufacturer number | 206045 2X40 | |
| Article class | 11X | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |