{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Circular saw blade, TiAlN, ⌀×thickness: 63X2mm
Article no.: 670112
Catalog no.: 179912
Article code:
Product details
Technical Data
| Through-coolant | no | |
| Entry of cooling lubricant | without cooling lubricant entry | |
| Escape of cooling lubricant | without cooling lubricant exit | |
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | Kreissägeblatt, TiAlN, ⌀×Stärke: 63X2mm | |
| Dry machining | suitable | |
| Tolerance Class | H7 | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Cutter diameter | 63 mm | |
| Diameter of mounting hole | 16 mm | |
| Countersink diameter of mounting hole | 32 mm | |
| Cutting width | 2 mm | |
| Hub width | 2.5 mm | |
| Setting angle | 90 degrees | |
| Relief angle | 0 degrees | |
| Side rake angle | 0 degrees | |
| Number of cutters (peripheral side) | 24 | |
| Tooth pitch | 8.25 mm | |
| Corner version | sharp-edged | |
| Tool material | HSS | |
| Cutting media, manufacturer’s designation | HSS | |
| Coating | TiAlN | |
| Usable length | 14.5 mm | |
| Overall length | 2 mm | |
| Functional length | 2.5 mm | |
| Weight | 54 g | |
| Cutting direction | right-hand cutting | |
| Standard | DIN 1837/1838 | |
| Machining method | parting-off milling | |
| Type of product | circular saw blade | |
| Correction factor | 1.5 | |
| Max. cutting depth | 14 mm |
Identification & Classification
| Article number | 670112 | |
| Catalog number | 179912 | |
| EAN / GTIN | 4045197938008 | |
| Manufacturer number | 179912 63X2 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
N
400
N
600
N
300
P
50
P
40
M
20
M
15
N
300
Description
Version:
Optimised geometry and coating. Extra deep relief ground for reliable chip evacuation. For flat base of the slot.
Note:
- Tooth profile BW.
- The tolerances for the circular saw blade diameter are considerably better than the values permissible to DIN 1837/1838, in some cases by up to 50%.