{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for milling SEET 1305 AGSR, for Softcut® 45 high-performance face mills, HB8630
Article no.: 670688
Catalog no.: 213586
Article code:
Product details
Technical Data
| Manufacturer’s designation | SEET 1305 AGSR | |
| Base form | square | |
| Thickness of insert S | 5.56 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 13.34 mm | |
| Height of cutting edge | 5.56 mm | |
| Diameter of insert d | 13.34 mm | |
| Corner radius R | 1 mm | |
| Corner chamfer length C | 2.05 mm | |
| Corner chamfer angle | 45 degrees | |
| Corner angle | 90 degrees | |
| Setting angle | 45 degrees | |
| Normal clearance angle (main cutting edge) | 20 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 28 degrees | |
| Normal clearance angle (flat cutting edge) | 28 degrees | |
| ISO-Code | SEET 1305 AGSR | |
| Max. cutting depth ap max | 4 mm | |
| Tool material | Carbide | |
| Machining group | M (stainless steel) | |
| Cutting media, manufacturer’s designation | HB8630 | |
| Coating | TiAlN | |
| Grade | HB8630 | |
| Insert thickness T | 5.56 mm | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Number of teeth | 4 pcs. | |
| Direction of action | neutral | |
| Suitable for material | stainless steel (M) | |
| Tolerance Class | E | |
| Machining method | face milling (FPL) | |
| Finishing / roughing assignment | roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Number of potential uses | 4 pcs. | |
| Weight | 6 g | |
| Content | 1 pcs. | |
| Content | single part | |
| Correction factor fz | 2.5 |
Identification & Classification
| Article number | 670688 | |
| Catalog number | 213586 | |
| EAN / GTIN | 4045197806178 | |
| Manufacturer number | 213586 INOX | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
M
170
M
130
S
30
Description
Version:
Increased insert thickness for the highest metal removal rates. Protected against wear by the latest coating.
Note:
Standard application values for ae = 0.5... 1×D / apmax = 4 mm.
For the best surface quality, use together with No. 213595 UNI.
For the best surface quality, use together with No. 213595 UNI.