{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Alternative article:
-
Article no.: 2159270
Indexable insert for turning TNMG 160408, for finish machining, Wiper
Article no.: 671492
Catalog no.: 251435
Article code:
New product
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Dry machining | suitable only under restricted conditions | |
| Oil | suitable | |
| Air | suitable only under restricted conditions | |
| Base form | triangular | |
| Insert width | 15.3 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 15.3 mm | |
| Insert version | neutral | |
| Cutting edge length | 15.3 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 60 degrees | |
| Rake angle | 18 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| ISO-Code | TNMG160408 | |
| Attachment hole diameter | 3.81 mm | |
| Type of chip breaker | WSS | |
| Tool material | Carbide | |
| Standard designation for cutting medium, 2nd Priority | HC-P20 | |
| Standard designation for cutting medium, 3rd Priority | HC-P20 | |
| Machining group, manufacturer-specific | P20 | |
| Machining group | P (steel) | |
| Tool application group | P20 | |
| Cutting media, manufacturer’s designation | HB7020 | |
| Coating | TiCn-Al2O3 | |
| Grade | HB7020 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | TN1604082N | |
| Interface coding for insert according to ISO TS 13399-60 | TN1604082N | |
| Insert designation | TNMG160408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 6 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | parting off (ESA) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | rounded (E) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 6 pcs. | |
| Weight | 890 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 671492 | |
| Catalog number | 251435 | |
| EAN / GTIN | 4045197948618 | |
| Manufacturer number | 251435 HB7020 | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
