{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning DNGA 110408, CBN (0°)
Article no.: 671528
Catalog no.: 255442
Article code:
Product details
Technical Data
| Cooling lubricant | no | |
| Wet minimum | unsuitable | |
| Wet maximum | unsuitable | |
| Manufacturer’s designation | BU7220; DNGA 110408 | |
| Dry machining | suitable | |
| Oil | suitable only under restricted conditions | |
| Air | suitable | |
| Base form | rhombic | |
| Insert width | 9.525 mm | |
| Blade thickness | 4.76 mm | |
| Insert length | 11.627 mm | |
| Insert version | neutral | |
| Cutting edge length | 11.627 mm | |
| Cutting edge height | 4.76 mm | |
| Insert diameter | 9.525 mm | |
| Corner radius | 0.8 mm | |
| Corner angle | 55 degrees | |
| Rake angle | 0 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 0 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | continuous | |
| ISO-Code | DNGA 110408 | |
| Tool material | BN | |
| Machining group | H (hard materials) | |
| Tool application group | HOG | |
| Cutting media, manufacturer’s designation | BU7220 | |
| Coating | uncoated | |
| Grade | BU7220 | |
| Insert thickness | 4.76 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | DNGA110408 | |
| Insert designation | DNGA 110408 | |
| Type of product | Cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | hardened steel (H) | |
| Tolerance Class | G | |
| Machining method | thread processing internal / external (EGE) | |
| Finishing / roughing assignment | Finishing | |
| Type of fastening | Hole | |
| Chip breaker | yes | |
| Cutter version | sharp-edged (F) | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 7 g | |
| Content | 1 pcs. |
Identification & Classification
| Article number | 671528 | |
| Catalog number | 255442 | |
| EAN / GTIN | 4045197895271 | |
| Manufacturer number | 255442 G | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
H
H
H
Description
Version:
Fitted with 2 cutters.
Description:
New type of CBN with a balanced combination wear-resistance and tensile strength for general-purpose use in hardened steel up to 67 HRC in combination with a special constitution. For use both in continuous cutting and also in slightly interrupted and heavily interrupted cutting.