{{ name }}
Article no. {{ combinedCodeWithHighlight }}
Article code:
EAN / GTIN:
Manufacturer number:
Cat. No.:
Indexable insert for turning CCMT 060208, for medium machining, Wiper
Article no.: 671569
Catalog no.: 260145
Article code:
Product details
Technical Data
| Cooling lubricant | yes | |
| Wet minimum | suitable | |
| Wet maximum | suitable | |
| Manufacturer’s designation | 260145 HB7020; CCMT 060208 Wiper Sorte HB7020 | |
| Dry machining | suitable only under restricted conditions | |
| Base form | rhombic | |
| Width of insert B | 6.4 mm | |
| Thickness of insert S | 2.38 mm | |
| Length of insert L | 6.35 mm | |
| Insert version | neutral | |
| Length of cutting edge l | 6.4 mm | |
| Height of cutting edge | 2.38 mm | |
| Diameter of insert d | 6.35 mm | |
| Corner radius R | 0.8 mm | |
| Corner angle | 80 degrees | |
| Rake angle | 18 degrees | |
| Setting angle | 0 degrees | |
| Normal clearance angle (main cutting edge) | 7 degrees | |
| Normal clearance angle (auxiliary cutting edge) | 0 degrees | |
| Normal clearance angle (flat cutting edge) | 0 degrees | |
| Cutting conditions | interrupted | |
| Cutting edge length, limited | 5.6 mm | |
| ISO-Code | CCMT 060208 | |
| Type of chip breaker | WSM | |
| Cutting depth, recommended working area, min. | 0.4 mm | |
| Cutting depth, recommended working area, max. ap max | 2 mm | |
| Cutting depth ap, min. | 0.55 mm | |
| Cutting depth ap, max. | 2 mm | |
| Cutting speed, main application, min. | 120 m/min | |
| Cutting speed, main application, max. | 350 m/min | |
| Min. feed rate fz | 0.15 mm/rev. | |
| Max. feed rate fz | 0.3 mm/rev. | |
| Tool material | Carbide | |
| Machining group | P (steel) | |
| Cutting media, manufacturer’s designation | HB7020 | |
| Grade | HB7020 | |
| Insert thickness T | 2.38 mm | |
| Type of fastening for insert | M (with cyl. hole clamped from above and via the hole) | |
| Interface coding for insert | CCMT 060208 | |
| Insert designation | CCMT 060208 | |
| Type of product | cutter insert | |
| With ISO code | yes | |
| Standard | DIN ISO 1832 | |
| Number of teeth | 2 pcs. | |
| Direction of action | neutral | |
| Suitable for material | steel (P) | |
| Tolerance Class | M | |
| Machining method | thread processing external (EGA) | |
| Finishing / roughing assignment | finishing; roughing | |
| Type of fastening | hole | |
| Chip breaker | yes | |
| Cutting conditions | interrupted | |
| Number of potential uses | 2 pcs. | |
| Weight | 28 g | |
| Content | 1 pcs. |
Packaging units
| 1 Carton | 10 pieces |
Identification & Classification
| Article number | 671569 | |
| Catalog number | 260145 | |
| EAN / GTIN | 4045197948854 | |
| Manufacturer number | 260145 HB7020 | |
| Article class | 21G | |
| Manufacturer/responsible person | Hoffmann Supply Chain GmbH & Co. KG, Poststraße 15, 90471 Nürnberg, Germany, www.hoffmann-group.com |
Application Table
P
P
P
P
